WeLoc BoxLoc PA 7

WeLoc BoxLoc PA 7 white

Standard colors



Model: WeLoc BoxLoc PA 7 white

Article no.: 1800701

Material: Polyamide

Color: White

Sealing gap: 7 mm / 1/4 inch.

Weight: 5.6 g - 0.20 oz

Measure: 40 x 20 x 13 mm
1 9/16 x 3/4 x 1/2 inch.

Technical Info

Temperature ranges
-20 to +140 ⁰C / -4 to +284 ⁰F

Sterilization methods
Autoclave, EtO, Gamma


Pcs/carton: 2000

Pcs/pallet: 60000

40 cartons x pcs/carton = Pcs/pallet

Weight/carton: 8.9 kg - 19.6 lbs

Weight/pallet: 381 kg - 840 lbs

Delivery and Stock information »

Printing WeLoc BoxLoc PA 7

Printing area front WeLoc BoxLoc PA 7

Front: 23 x 6 mm - 29/32 x 1/4 inch.

When printing we always recommend a white WeLoc clip as first choice since a slight difference of shade may occur when printing onto colored backgrounds. We will send a scaled electronic proof for your approval before starting the production.

Printing example WeLoc BoxLoc PA 7

Printing facts

Can be printed in 1-4 printing colors + CMYK.

Required artwork:
A vector based EPS-file made in Adobe Illustrator. (Please contact us if you need help)

Delivery time:
Normally 3-4 working weeks after receiving the order and artwork. For smaller quantity (up to 10.000 pcs)


PDF iconPDF print measurements.

Embossing WeLoc BoxLoc PA 7

Your logotype and/or message can be embossed into the clip. Suitable at large volumes.

We will send a scaled electronic proof for your approval before starting the production.


EMBOSSING is a more cost-efficient alternative by comparison with printing when exceeding quantities shown below.

1-color print: 13000

2-color print: 7000

3-color print: 3000

4-color print: 2000

Color Specification

All our standard range of colors are absolutely free from cadmium and lead. This is to meet the FDA regulations as well as other international requirements for products related to the food market.

Based upon these facts you are recommended to choose a WeLoc in one of our standard colors, and when printing we always recommend a white WeLoc with the customers accurate Pantone for the print.

WeLoc PA, WeLoc PA Scoop, WeLoc PA Spoon and WeLoc Gripper PA 100 are made of Nylon PA 6.6 which has to be moulded at a very high temperature and so the color pigment must have very special properties.

Please also be aware of that to test out a new Pantone color on the WeLoc closures we need minimum 10-12 extra working weeks for color matching and production.

Our standard colors are:

Quality & Origin

All WeLoc clips are produced under certified conditions by Weland Plastic AB who are located in the same facility here in Sweden. Weland Plastic are certified according to IATF 16949 & ISO 14001.

Country of origin: Sweden

Custom Tariff nr: 39235090

Food contact

Our WeLoc products are made from Food Grade compounds and color additives which comply with the EU Regulations, EU 1935/2004 as well as the FDA Regulations. The only exception is the fiberglass reinforced WeLoc Gripper PA which is recommended only for secondary use on food packages.


We hereby confirm that we are informed of the REACH-legislation and understand our responsibility in REACH.

Our products do not contain chemicals included in the list of substances of very high concern (SVHC) restricted in REACH, based on information from our suppliers.

Routines are introduced to follow the changes of legislation and restrictions in REACH.

Care & Use Advice for your WeLoc

Care & Use Advice

All WeLoc clips can easily be cleaned and reconditioned. If WeLoc PA closures have got bent after use on thick packages they will return to the original shape after processed in a dishwasher or boiling water for a while. PA (Nylon) is a technical plastic material with a unique “memory”.


Scandinavia Direct Limited
Giltbrook, Beacon Road West
East Sussex TN6 1QL


Phone: +44 1892 663212
E-mail: info@weloc.co.uk


  • Your cart is empty